330 double liquid peristaltic pump
-330 design The speed of AB pump wheel is controlled by two stepper motors, and the ratio is accurate and the glue is stable. Use as much as you need to save unnecessary waste, no AB glue and more heat issues. Standard square static mixing tube is used to fully mix without bubbles, without washing.
-330 In addition to the two-liquid dispensing system, it also contains a 500ml syringe assembly.
-Miniature metering pump head from Taiwan, with stable flow and accurate proportioning.
-Soft pump tube with 4, 8, 16 rotor pump wheel (replaceable), no general gear pump is easy to wear and leak.
-Military grade pump tube is stable and abrasion-resistant, suitable for all transparent or black, white, colored powder filler glue.
-16 rotors with micro pump tube, suitable for automatic dispensing of 0.1 ~ 0.01 grams of ultra-micro AB glue.
-4 rotors with reinforced pump tube, suitable for 1 ~ 4 g per second
-Suitable for medium-low viscosity (<20,000cps) AB double-liquid or single-liquid epoxy, silicone, PU glue with a weight ratio of 20: 1 ~ 1: 1
-Microcomputer precise control of independent A and B glue output speed 0.0 ~ 120.0 rpm.
-Dispensing / re-suction setting time is independently controlled 0.0 ~ 120.0 seconds
-The setting value is stored automatically, not afraid of power failure.
-Special design of mixed hose chuck, easy installation, no need to clean every day.
· Dispensing electric control machine (A, B pump wheel speed control, glue dispensing / back suction time control, manual control)
· Two-component electric dispensing valve (1600 micro stepper motor, A + B independent control, 4, 8, 16 rotor pump wheel)
· Static rubber hose chuck (easy disassembly, no cleaning required)
Durable electric pedal (2m cable length)
Parts box / consumables (24 section mixing pipe, 6mm pump pipe, PE pipe, straight joint, screw, seal ring)
· Operation and Maintenance Manual (Detailed Manual)